ABOUT US
PROJECT
EFFECT CHART
NEWS
FEEDBACK
CONTACT US
Golden Fish High L
Cheng Feng 17F ind
Pay attention to clicking in equipment
Read:883    Date:2008-10-22 11:33:10
A lot of others finish fitting up, will often find all kinds of questions. For this reason, we select and edit this specially gently, hope readers draw lessons from.

A) Variola Project

1. The gypsum board of paper is hung and carried: The surface is not smooth, there are cracks.
2. Mineral wool sucks the sound board to hang and carry: Knock against, not smooth, piece together and can not sew suitable and straight, non- tight, it is not even that sew, pollute, the pattern is asymmetric.
3. The metal hangs roofs: Colour difference, the surface is not levelled, seam warping, the seam is not suitable and straight, knock against.
4. Plastic board: Not smooth, the seam is not straight, not tight, the frame separates the angle non- straight, not tight.
5. Gypsum board: Not smooth, the seam is not tight, not straight, it is not even that sew, the pattern is not clear, asymmetric.
6. A fossil fragments hang: Not smooth, non- suitable and straight, non- tight, non- firm, it is not even to join degree.
7. Equipment installation mouth: Non- tight, not, asymmetric, it is not neat to arrange, the interval is not even.

B) Ground Project

1. Natural stone material: Colour difference, the seam is not tight and not smooth, the lamination is not obeyed the board, against the flower, knock against, the smooth finish of surface of the mirror is poor, pollution, can not make a parting evenly.

2. Glazed tile: Knock against, colour difference, the crack of glazed tile, not smooth, the seam is not tight, not straight, not even, the activity is unureal, pollute.

3. The cement: The crack, divide one dose of fillets and does not obey straight, the fillet appears neither completely nor clearly, lean towards aslantly, colour difference, the stone can not be distributed evenly, color is polluted, each fades, the smooth finish of surface is poor.

4. Artificial marble: Not smooth, warping, full of cracks, fade, it is all to retreat, the pattern is not obeyed, the seam is neither straight nor even.

5. Timber apron: Colour difference, the seam is not smooth, not straight, not tight, the crack, warping, there is a noise while walking, baseboard and ground are not vertical, the surface is not smooth, connect and rub with the hands level.

6. Plastic floor: The floor and basic unit glue the joint to separate, drum bubbles, sew by mistake, piece together and can not sew tightly, not suitable and straight, fade, pollute, scratch, the pattern is asymmetric.

7. Carpet: Unless unless the not smooth, get up by drum, unless fold, the inconsistent in color,turn-ups, roll,etc..

C) Wall Column Veneer Project

1. Natural stone material: Colour difference, the seam is not smooth, not straight, not even, the lamination is not suitable the board, fracture, knock against, pollution, come off.

2. Artificial stone material: (1) Artificial marble: Not smooth, warping, it is all to retreat, full of cracks, the pattern is not obeyed, the seam is neither straight nor even. (2) Prefabricate terrazzoes: Hollowing, the seam is not smooth, colour difference, the chink is not even, it is not even that the stone is distributed.

3. Glazed tile: Colour difference, not smooth, the seam is neither suitable nor straight, the wall is full of bumps and holes, the crack, change color, pollute.

4. Wooden dado: Fracture, warping, the mark in an opposite direction, cracked, colour difference, open glue, bubble, the wooden line is asymmetric, scratch, will nail the eyes tomorrow.

5. Wrap up the cloth: Not smooth, the hunch, fold, the radian is not even, escort and sew non- straight, pollute.

6. Metal panel: Colour difference, not smooth, knock against, the drum arises, pollute, the smooth finish of surface is poor.

D) Doors And Windows Project

1. Shut the window of Jinmen with aluminium: The doors and windows seat is inaccurate, have not inlaid and filled out the fluid sealant notch outside the window frame of the door, has used the cement sand thick liquid to caulk in the perimeter of window frame, bright screw deal with, other wall push away and draw the water accumulation of the notch, the seam is not vertical, the angle is not up right and foursquare, it is not unobstructed to push away and draw.

2. Wooden doors and windows: The door casement is not smooth and non- tight, the seam is not even, casement warping, the frame is not up right and foursquare, the frame is crooked, the hammer is printed, the cross does not sew the cross, the switch is ineffective, does not shut properly, it is not neat to shut a page of troughs, the position of page differ that shut, the screw becomes flexible, the veneer door leaf opens glue, the door leaf of hollow plywood reveals the muscle, the hunch of door leaf.

3. Plastic doors and windows: Colour difference, surface coarse, door casement flee horn is non- up right and foursquare, out of shape, pollute, separate corner to be neither tight nor frank, have not inlaid and filled out fluid sealant in the perimeter of window frame, has connected the screw and hammered into shape directly in the ABC of window frame, the switch is ineffective, fittings quality time.

4. The doors and windows of colored stencil plate: Colour difference, knock against, the switch is ineffective, can not make a parting evenly, there is no sealing strip in door window frame and one pair of frames.

5. Steel doors and windows: ? Taste coarsely, the window frame of the door is not up right and foursquare, warping, the seam is great, non- even, the door casement is out of shape. It is not enough for the five metals screw to twist and enter depth, the switch is ineffective, the external dimension is partial and large.

6. Push away and pull: Rub the bottom between door and guide, the hand-cut between door and floodgate, the five metals fittings are bad, it is not enough to assemble accuracy, the surface of material is damaged.

7. It is flat to open the door: It is too big to make a parting, the door is flagging, out of shape, rub the door frame, the ground wastes, the gate is indignant.

8. Door windowpane: The crack, the bubble, the ripple, the chink is not even.

E) Paint Coating

1. Paint: Paint flow, hang, paint membrane contract crackle, bite bottom, paint membrane surface haze, paint membrane bubble, fall into empty, wrinkle, the surface produces the line silk, the depth of color and luster differs.

2. Coating: Flow and fall, brush the line, bleeding, the color floats, whiten, grip the bottom, wrinkles, the hole of the needle, the peel of the tangerine, bubble, apply the membrane coarsely, lose the powder, unglazed, fracture, come off, go back to glue etc..

F) Thin Woodwork

Fracture, warping, plane the mark, the seam is not tight, piece together and sew up the black line, colour difference, the pattern is not suitable, the wooden screw cap is crooked, feel coarse.

G) Ornamental Design

Incomplete, the pattern is not clear, the overcast angle is not straight, the open angle does not hold out, top layer perforated, the surface is coarse, the seam is obvious, not smooth, non- even, the whole veneer is not smooth, the pattern is irregular, hollowing, pollution, fly stick up out of shape, separate corner to be tight, not.

[Favourites][Print][Close][back] [Size:16 14 12]  
:Fit up and select suitable materials in the course
Next:Confirmation of the bridal chamber
 
 
Copyright © 2008 GOLD RIVER( International ) Engineering All Rights Reserved.  
Address: MACAU CENTRO COMERCIAL FIRST NACIONAL P11-04
Tel:+852-31807689 +853-28701013